Filter
Top Products
C-10
Adaptec Flash Utility (AFU)
b Updating the Flash on Multiple Controllers—To flash the
firmware on multiple controllers, type:
afu update /C <
controller_number_a
>,<
controller_number_b
>
Where
<controller_number_a>
and
<controller_number_b>
is the number of one of the Adaptec RAID controllers whose
firmware you are updating.
To upgrade controllers 0, 2, and 3 for example, type:
afu update /C 0, 2, 3
c Updating the Flash on All Controllers Simultaneously—To
flash the firmware on all controllers, type:
afu update /C all
Note: The UFI file identifies the appropriate controllers,
so you do not have to worry about flashing the wrong
controller.
8 The AFU prompts you to put in the first firmware disk.
When it detects that the disk is in the drive, the AFU reads the
part of the firmware image contained on the first disk.
9 When prompted, remove the first firmware disk and insert the
second firmware disk.
10 If necessary, repeat Step 9 until the process is complete.