Filter
Top Products
1-10
Introduction
Silencing the Alarm
The alarm continues to sound until one of the following actions is
taken:
■ The array with the failed member is deleted.
■ If the array is redundant, a rebuild begins.
■ The alarm is silenced using SATASelect or SCSISelect. For
details, see the Alarm Control option on page A-11 or Adaptec
Storage Manager online Help.
Automatic Failover
Adaptec RAID controllers can automatically rebuild an array when
a failed drive is replaced with a new drive. This feature applies
only to redundant arrays in SES- or SAF-TE-enabled drive
enclosures. See page A-10 for details.
Adaptec Battery Backup Module
Adaptec RAID controllers accept an optional Adaptec battery backup
module.
Notes:
■ To see if the controller is available with battery modules,
see Controller Features on page 1-5.
■ To see the battery module connector location for your
controller, see Appendix G.
■ To purchase a battery module, visit www.adaptec.com.