Filter
Top Products
D-29
Command Line Interface
Switches
/always
—Specifies whether to initialize the disk even if the disk
has existing data. (Cannot override open files.) The default is
FAL SE .
/unconditional
—Specifies whether to initialize the disk even if
arrays on the disk have open files. The default is FA LS E.
disk list [/all={
boolean
}] [/full={
boolean
}] [{device_ID}]
Lists the disks available on the controller.
Parameters
{device_ID}
—
ID number of the device to display information.
Switches
/all
—List of all devices on the controller.
/full
—Detailed information for devices. The default is FALS E.
disk remove dead_partitions {device_ID}
Removes all failed partitions from a disk.
Parameters
{device_ID}
—ID number of the device from which to remove
failed partitions.
disk set default {device_ID}
Sets the default ID for use in CLI commands.
Parameters
{device_ID}
—ID number of the device.
disk set smart [/all={
boolean
}] [/clear={
boolean
}]
[/enable_exceptions={
boolean
}][/logerr={
boolean
}]
[/perf={
boolean
}] [/report_count={
boolean
}]
[{device_ID}]
Changes a disk’s Self-Monitoring, Analysis and Reporting
Technology (SMART) configuration.
Parameters
{device_ID}
—ID number of the device on which to change
SMART configurations.