Filter
Top Products
D-21
Command Line Interface
container list [/all={
boolean
}] [/full={
boolean
}]
[{container}]
Lists information about the arrays on the controller.
Parameters
{container}
—ID number of the array containing information
to display.
Switches
/all
—Specifies whether to list all containers on the system.
/full
—Specifies whether to display detailed information.
container move {container1} {container2}
Moves the first array number specified to the second array
number specified; in effect, to renumber an array.
Parameters
{container1}
—ID number of the array to renumber.
{container2}
—ID number to assign to the array specified in
container1.
container promote {container}
Creates a multilevel volume from a RAID 0 or a single entry
volume.
Parameters
{container}
—ID number of the array to promote to a
multilevel array.
container readonly {container}
Sets the protection on the array to read-only access.
Parameters
{container}
—ID number of the array to set to read-only access.
container readwrite {container}
Sets the protection on an array to read-write access.