Filter
Top Products
2-8
Installing the Controller and Drives
10 Click Next.
11 Type the name you want to assign to the RAID 5 you are
creating, then click Apply.
The system creates the array. The display refreshes to show the
just-created RAID 5 on the right side of the display. You may
use the array immediately. However, if you want to make the
array bootable you must allow the array to finish building
before restarting the system.
12 When you are ready to continue, close all windows.
The Main Menu is active.
13 Click Reboot to restart your system.
14 Remove the Adaptec installation CD.
15 If you want to make the array bootable, do so now. For details,
see page A-5.