Filter
Top Products
D-14
Command Line Interface
■
Mirror Set Create
—Creation of a RAID 1 (mirror).
■
Mirror Set Normal
—The RAID 1 is in the normal state.
■
Reconfiguration Copy Container
—An array is being used as a
copy (hidden) array (Copy).
■
Reconfiguration Destination Container
—An array is being
used as a destination (hidden) array (Dest).
■
Reconfiguration RAID 5 Set
—An array is being used as a
RAID 5 (hidden array).
■
Reconfiguration Source Container
—An array is being used
as a source (hidden) array.
■
Reconfiguration Temporary Container
—An array is being
used as a temporary (or hidden) array (Temp).
■
RAID 5 Set Unprotected
—Creation of a RAID 5 (Unprot).
Example
AAC0> container list
Executing: container list
Total Oth Stripe Scsi Partition
Label Type Size Ctr Size Usage C:ID:L Offset:Size
----- ----- ----- --- ------ ------- ----- ------------
0 Volume 30MB None 0:01:0 64KB: 15MB
Venus 02 64KB: 15MB
Container Show Cache
The
container show cache
attributes are defined as follows:
■
Global Container Read Cache Size
—Number of blocks
dedicated to the read cache.
■
Global Container Write Cache Size
—Number of blocks
dedicated to the write cache.
■
Read Cache Setting
—Reports whether the read cache is
enabled.
Example
AAC0> container show cache 0
Executing: container show cache 0
Global container Read Cache Size : 5345280
Global container Write Cache Size : 63332352
Read Cache Setting : ENABLE
Write Cache Setting : ENABLE
Write Cache Status : Active, cache enabled