Filter
Top Products
4-7
Installing and Starting Adaptec Storage Manager
Starting Storage Manager
Note: You need root privileges to run Storage Manager.
To start Storage Manager, use the procedure outlined in the table
below for your operating system.
If your operating
system is... Start Storage Manager as follows...
Windows
To run Storage Manager as a standalone application,
click
Start > Programs > Adaptec Storage Manager
,
then select the appropriate icon. To run Storage
Manager in a browser, open the browser, then type in
the IP address, colon (:), and
34572
as the port number.
1
1. To run Storage Manager in a browser, your network's DNS configuration must
have matching forward and reverse lookups.
Linux Change to the directory where you installed Storage
Manager by typing cd /usr/RaidMan. Then, use the
sh RaidMan.sh shell command.
OpenServer
UnixWare
OpenUNIX
Change to the directory where you installed Storage
Manager by typing cd /opt/RaidMan. Then, use the
sh RaidMan.sh shell command.
NetWare Type the LOAD RAIDMAN command.