Filter
Top Products
D-31
Command Line Interface
Parameters
{device_ID}
—ID number of the device for which to display
SMART information.
Switches
/all
—Specifies whether to display SMART configurations for
all disks.
/full
—Specifies whether to display detailed SMART
configuration information for one or all disks.
/view_changeable
—Specifies whether to display the
configuration information that can be set on a SMART disk.
disk show space [/all={
boolean
}] [{device_ID}]
Displays space usage information.
Parameters
{device_ID}
—ID number of the device for which to display
space usage information.
Switches
/all
—Specifies whether to display all space usage.
disk verify [/repair={
boolean
}] [/wait={
boolean
}]
{device_ID}
Verifies all blocks on a device and, optionally, repairs any bad
blocks.
Parameters
{device_ID}
—ID number of the device to verify.
Switches
/repair
—If FALSE (the default), the command only reports
failures. If TRUE, bad blocks are automatically repaired, if
possible.
/wait
— If FAL SE (the default), the operation is performed in the
background and the command prompt is returned immediately.
If TRUE, the operation is performed immediately and the
command prompt is returned only when done.