Filter
Top Products
D-27
Command Line Interface
controller list [/domain={string}] [{string}]
Lists all controllers or displays information about the currently
opened controller.
Parameters
{name}
—Computer name from which to display all controllers
or specific information about the open controller.
Switches
/domain
(Windows only)—Specifies the domain in which the host
to be searched resides.
controller pause_io [{integer}]
Windows only—Pauses all I/O activity on the open controller
to allow online manipulation of hardware.
Parameters
{integer}
—Time in seconds to cause the controller to wait
before resuming I/O.
controller rescan
Rescans the channels and updates all underlying structures.
controller reset_channel {integer}
Resets a specific channel on the open controller.
Parameters
{integer}
—Channel on which to reset this channel.
controller resume_io
Performs rescan operation, then resumes I/O after
pause_io
.
controller set automatic_failover [/failover_enabled={
boolean
}]
Turns on or off automatic failover for the controller.
Switches
/failover_enabled
—Specifies whether to turn on or off
automatic failover on the controller. Specify 1 to enable, 0 to
disable. The default is 0.