Filter
Top Products
1-14
Introduction
■ UNIX—Use Acrobat Viewer because Reader is not available for
all operating systems. Your system must have Java Runtime
Environment 1.1.7B from April 11, 2000 or later. The Viewer is
located on the installation
CD
at
mount-point
/Acrobat_Reader
.
Note: To download Java Virtual Machine (JVM), visit
java.sun.com.
■ NetWare—Acrobat Reader and Viewer are not available for this
operating system or any DOS environment. You need to use a
computer that supports Acrobat Reader or Acrobat Viewer.
Software Tools Overview
The Adaptec RAID controller includes the following tools to
configure and manage your storage devices:
■ Adaptec Storage Manager—Storage management application
with a graphical user interface. Used to create, configure, and
manage arrays. For details, see Chapters 4 and 5.
■ Adaptec RAID Configuration (ARC) Utility—BIOS-based
utility that contains the following components:
– Array Configuration Utility (ACU)—Storage management
utility. Used to create, configure, and manage arrays. Also
available as a DOS-based executable (see below). For details,
see Appendix A.
– SATASelect and SCSISelect—Device management utility.
Used to verify the hardware configuration of the controller
and the drives. For details, see page A-9.
– Disk Utilities—Drive management utility. Used to format
and verify drives. For details, see page A-15.
■ Array Configuration Utility (ACU) for DOS—DOS utility.
Used to create, configure, and manage arrays. Also available as
part of the ARC utility (see above). For details, see Appendix B.
■
Adaptec Flash Utility (AFU)
—DOS utility. Used to update, save,
or verify the controller firmware, BIOS, and ARC versions. For
details, see Appendix C.