Filter
Top Products
Chapter 7 - Using the LCD for Configuration and Management
118 Campus-REX2 RS Interface Card User Manual
Router Port Statistics
To view the Router Port Statistics:
1 Press Escape until CAMPUS RS I/F: REX2 is displayed.
2 Press Next until REX2 CONFIG & STATUS is displayed.
3 Press Enter. CONFIGURE REX2 SETTINGS is displayed.
4 Press Enter. NETWORK PROTOCOL = Bridge is displayed (if not,
you must change the setting to Bridge to view Bridge Port Statistics).
5 Press Next until Bridge STATISTICS is displayed.
6 Press Enter. FRAMES is displayed.
7 Press Enter to display the first screen of statistics.
8 Press Next to display the second screen of statistics (if any).
9 Press Escape. FRAMES (or the appropriate statistic title screen) is
displayed.
10 Press Next to advance to the desired statistic item, displayed in order:
MULTICASTS, ERRORS, UNDERSIZED, OVERSIZED, EX. DELAY,
and EX. COLLISIONS. Repeat steps 7-9 as desired to display the
statistics for the item.
11 To clear the statistics, press Next until Press ENTER to Clear
Statistics is displayed. Press Enter to reset all statistics to zero.