Filter
Top Products
Chapter 1 - Installing and Accessing the REX2
Campus-REX2 RS Interface Card User Manual 3
Installing into a Desktop Unit
Install the Campus-REX2 interface card into a Campus-RS or Campus-HRS
desktop unit before you install the desktop unit (install power and HDSL
cables). Install the Campus-RS desktop unit using the instructions in the
Campus-RS Desktop Unit User Manual.
1 Ensure that the desktop unit is not connected to power.
2 Slide the Campus-REX2 into the guide rails in the rear of the
desktop unit.
3 Gently press the card into place until it is seated firmly in the mating
connector.
4 Secure the card in place using the two captive screws.
5 Complete the desktop unit installation using the Campus-RS Desktop
Unit User Manual.
Ensure power is off to the desktop unit before you install the
Campus-REX2. Installing the card with the power on may
cause damage to the desktop unit, the card, or to both.
CAMPUS-RS
C
O
N
S
O
L
E
L
IN
E
Guide rail
Campus-REX2 RS
Interface card
Campus-RS Desktop Unit chassis
120 VAC@60Hz
or 220 VAC@50Hz
.2A Max
REX2 Router
L
i
n
k
/
A
c
t
i
v
i
t
y
1
0
B
a
s
e
-T
1
0
0
B
a
s
e
-T
x
M
D
I
-
X
M
D
I
P
C
H
U
B