Filter
Top Products
Chapter 1 - Installing and Accessing the REX2
14 Campus-REX2 RS Interface Card User Manual
2 Press (default password) to log on. If a password was previously
configured, type that password then press . The Main Menu is
displayed.
Once you are logged into the Campus unit through the console port, there is
no timeout defined for the session. You will stay connected until you either
log out or the Campus unit detects a disconnected console cable (DTR signal
changes to inactive).
ENTER
ENTER
Jul 07, 2003 ADC TELECOMMUNICATIONS, CAMPUS RS, Version 5.1 08:19:34
Local Unit ID: Local I/F: REX2
Remote Unit ID: Inactive Remote I/F: Inactive
Circuit ID:
MAIN MENU
1) SYSTEM STATUS
2) REX2 CONFIGURATION AND STATUS
3) SYSTEM CONFIGURATION
4) MAINTENANCE
5) REMOTE LOGON
(L)ogout
ENTER CHOICE>