Filter
Top Products
Chapter 1 - Installing and Accessing the REX2
6 Campus-REX2 RS Interface Card User Manual
2 Plug one end of the Category 5 cable into the 10/100Base-T connector on
the Campus-REX2 faceplate.
3 Connect the other end of the Ethernet cable to the local Ethernet
equipment (repeater, PC NIC, or other Ethernet device).
The Campus-REX2 10/100Base-T interface operates in either
half- or full-duplex mode which is determined by autosensing
its network connection. Both the LCD menu and console
menu displays the mode.
120 VAC@60Hz
or 220 VAC@50Hz
.2A Max
RE
X2 Router
Link/A
ctivity
Campus-RS Desktop Unit
10 Base-T
100 Base-Tx port
Category 5 cable
PC, hub, router or
other Ethernet equipment
Ethernet port
M
D
I-X
M
D
I
P
C
H
UB
10 B
ase-T
100 B
ase-Tx