Filter
Top Products
Chapter 1 - Installing and Accessing the REX2
Campus-REX2 RS Interface Card User Manual 15
Logging On a Remote Campus Unit
Log on the remote Campus unit which is at the far end of the HDSL
connection from the local Campus unit you are logged into. The remote
Campus unit is accessed through the Main Menu of the local Campus unit:
1 From the Main Menu of the local Campus-REX2, type then press
. The following message is displayed:
Enter <ESC><ESC> to Exit Remote Login Mode.
Remote Login, Please wait......
You can exit from this function or from the remote login by pressing
twice. The following logon screen is displayed.
The menu header changes to indicate the remote unit ID as the local unit,
and local unit ID as the remote. This shows that the terminal program is
physically connected to the local unit, but is configuring as if it were
connected to the remote unit.
If the remote unit is also a Campus-REX2, the screens and procedures on
the Remote Main Menu are identical to those on the Local Main Menu,
except the REMOTE LOGON option is not available. If the remote unit
is not a Campus-REX2, the screens support that remote interface card
(see the appropriate interface card user manual for a description of the
screens and configuration options).
5
ENTER
ESC
Jul 07, 2003 ADC TELECOMMUNICATIONS, CAMPUS RS, Version 5.1 08:19:34
Local Unit ID: Southall Quad 4 Local I/F: REX2
Remote Unit ID: Central Remote I/F: REX2
Circuit ID: Southeast line 421
REMOTE_LOGON PASSWORD >