Filter
Top Products
Chapter 3 - Configuring the REX2
52 Campus-REX2 RS Interface Card User Manual
1 From the Router Configuration screen, type then press .
The Static Route Configuration screen is displayed.
2 To add a static route, type then press . Enter the IP address,
subnet mask, and gateway IP address at the prompt for the destination
host to which packets will be sent.
Required format is nnn.nnn.nnn.nnn
Enter Destination IP Address: 192.128.128.60
Enter Destination IP Subnet Mask: 255.255.255.0
Enter Gateway IP Address: 192.128.128.65
Enter Hop Count: 3
The following message is displayed:
Route added
Hit Any Key to Continue
3 To delete a static route, type then press . Enter the IP address
at the prompt for the destination host you want to delete.
Required format is nnn.nnn.nnn.nnn
Enter Destination IP Address: 192.128.128.60
If you do not remember the IP address for the destination you want to
delete, go to Step 4 to view the Static Route Table.
3 ENTER
Jul 07, 2003 ADC TELECOMMUNICATIONS, CAMPUS RS, Version 5.1 08:19:34
Local Unit ID: Local I/F: REX2
Remote Unit ID: Remote I/F: REX2
Circuit ID:
STATIC ROUTE CONFIGURATION
1) ADD STATIC ROUTE
2) DELETE STATIC ROUTE
3) STATIC ROUTE TABLE
(R)eturn (M)ain Menu
ENTER CHOICE>
1 ENTER
2 ENTER