Filter
Top Products
Chapter 10: File Downloads and Uploads
170 Section II: Advanced Operations
Downloading the
AT-S63 Image
from a Local
Management
Session
Review “Guidelines” on page 168 before performing the following
download procedure.
To download a new AT-S63 software image into the application block
portion of the switch’s flash memory, making it the active image file on the
switch, from a local management session using Xmodem or TFTP,
perform the following procedure:
1. Establish a local management session on the switch where you want
to download the new management software.
2. From the Main Menu, type 5 to select System Administration.
The System Administration menu is shown in Figure 1 on page 32.
3. From the System Administration menu, type 9 to select System
Utilities.
The System Utilities menu is shown in Figure 6 on page 43.
4. From the System Utilities menu, type 2 to select Downloads and
Uploads.
The Downloads and Uploads menu is shown in Figure 54.
Figure 54. Downloads and Uploads Menu
5. From the Downloads and Uploads menu, type 1 to select Download
Application Image/Bootloader.
The following prompt is displayed:
Download Method/Protocol [X-Xmodem, T-TFTP]:
6. To download the AT-S63 image file using Xmodem, go to Step 7. To
download the file using TFTP, do the following:
a. Type T.
Allied Telesis AT-9424T/SP - AT-S63
Marketing
User: Manager 11:20:02 02-Mar-2005
Downloads and Uploads
1 - Download Application Image/BootLoader
2 - Upload Application Image/BootLoader
3 - Download a File
4 - Upload a File
R - Return to Previous Menu
Enter your selection?