Filter
Top Products
Chapter 31: 802.1x Port-based Network Access Control
570 Section VIII: Port Security
Setting Port Roles
This procedure sets the role of a port to authenticator or supplicant. You
must set the role of a port before you can configure its settings.
To set port roles, perform the following procedure:
1. From the Main Menu, type 7 to select Security and Services.
The Security and Services menu is shown in Figure 71 on page 220.
2. From the Security and Services menu, type 2 to select Port Access
Control (802.1X).
The Port Access Control (802.1X) menu is shown in Figure 211.
Figure 211. Port Access Control (802.1X) Menu
3. From the Port Access Control menu, type 3 to select Configure Port
Access Role.
The following prompt is displayed:
Enter port list ->
4. Enter the port whose role you want to change. You can configure more
than one port at a time. You can specify ports individually (for
example, 5,7,22), as a range (for example, 18-23), or both (for
example 1,5,14-22).
Allied Telesis AT-9424T/SP - AT-S63
Marketing
User: Manager 11:20:02 02-Mar-2005
Port Access Control (802.1X)
1 - Port Access Control .............. Enabled
2 - Authentication Method ............ RADIUS EAP
3 - Configure Port Access Role
4 - Configure Authenticator
5 - Configure Supplicant
6 - Display Port Access Status
7 - Configure Accounting
R - Return to Previous Menu
Enter your selection?