Filter
Top Products
AT-S63 Management Software Menus User’s Guide
Section V: Spanning Tree Protocols 463
Displaying the MSTP Port Configuration
To display the MSTP port configuration, perform the following procedure:
1. From the Main Menu, type 3 to select Spanning Tree Configuration.
The Spanning Tree Configuration menu is shown in Figure 152 on
page 420.
2. From the Spanning Tree Configuration menu, type 3 to select
Configure Active Protocol.
The MSTP menu is shown in Figure 162 on page 441.
3. From the MSTP menu, type P to select MSTP Port Parameters.
The MSTP Port Parameters menu is shown in Figure 166 on page
458.
4. From the MSTP Port Parameters menu, type 3 to select Display MSTP
Port Configuration.
The Display MSTP Port Configuration menu is shown in Figure 169.
Figure 169. Display MSTP Port Configuration Menu
Allied Telesis AT-9424T/SP - AT-S63
Marketing
User: Manager 11:20:02 02-Mar-2005
Display MSTP Port Configuration
|Cost |
Port | Edge-Port |Point-to-Point | External Internal|Priority
--------------------------------------------------------------
1 Yes Auto-Detect 200000 Auto 128
2 Yes Auto-Detect 200000 Auto 128
3 Yes Auto-Detect 200000 Auto 128
4 Yes Auto-Detect 200000 Auto 128
5 Yes Auto-Detect 200000 Auto 128
6 Yes Auto-Detect 200000 Auto 128
7 Yes Auto-Detect 200000 Auto 128
8 Yes Auto-Detect 200000 Auto 128
N - Next Page
U - Update Display
R - Return to Previous Menu
Enter your selection?