Filter
Top Products
AT-S63 Management Software Menus User’s Guide
Section II: Advanced Operations 245
3. From the Class of Service menu, type 1 to select Configure Port CoS
Priorities.
The following prompt is displayed:
Enter port number -> [1 to 24] ->
4. Enter the number of the port on the switch where you want to configure
CoS. You can specify only one port at a time.
The Configure Port COS Priorities menu is shown in Figure 85.
Figure 85. Configure Port COS Priorities Menu
Menu option 1 cannot be changed.
5. Type 2 to select Priority (0 - 7). The following prompt is displayed:
Enter new value -> [0 to 7]
6. Enter a new temporary priority value of 0 to 7 for the untagged frames
received on the port. For example, to assign a temporary priority level
of 4 to the ingress untagged packets, enter 4. The default is 0. (If you
perform Step 7 and override the priority level in ingress tagged
packets, this temporary priority value will also apply to those packets
as well.)
7. If you are configuring a tagged port and you want the switch to ignore
the priority tag in ingress tagged frames, type 3 to select Override
Priority and type Y.
All ingress tagged frames use the temporary priority level specified in
Step 6.
Allied Telesis AT-9424T/SP - AT-S63
Marketing
User: Manager 11:20:02 02-Mar-2005
Configure Port CoS Priorities
1 - Port Number ................... 1
2 - Priority (0-7) 0=Low 7=High ... 0
3 - Override Priority (Y/N) ....... N
C - Configure Port COS Priorities
R - Return to Previous Menu
Enter your selection?