Filter
Top Products
Chapter 36: TACACS+ and RADIUS Protocols
644 Section IX: Management Security
Displaying the TACACS+ Settings
To display the TACACS+ settings, perform the following procedure:
1. From the Main Menu, type 5 to select System Administration.
The System Administration menu is shown in Figure 1 on page 32.
2. From the System Administration menu, type 6 to select Authentication
Configuration.
The Authentication Configuration menu is shown in Figure 238 on
page 640.
3. Type 3 to select TACACS+ Configuration.
The TACACS+ Client Configuration menu is shown in Figure 240.
Figure 240. TACACS+ Client Configuration Menu
The TACACS+ Client Configuration menu provides the following
information:
TAC Server 1
TAC Server 2
TAC Server 3
The IP addresses of the TACACS+ servers.
TAC Global Secret
Global encryption secret if all the servers use the same one. The
maximum length is 39 characters.
TAC Timeout
The maximum amount of time the switch waits for a response from a
TACACS+ server before assuming the server is not responding.
Allied Telesis AT-9424T/SP - AT-S63
Marketing
User: Manager 11:20:02 02-Mar-2005
TACACS+ Client Configuration
1 - TAC Server 1 .................. 142.34.56.102
2 - TAC Server 2 .................. 0.0.0.0
3 - TAC Server 3 .................. 0.0.0.0
4 - TAC Global Secret ............. tech
5 - TAC Timeout ................... 30 seconds
R - Return to Previous Menu
Enter your selection?