Filter
Top Products
AT-S62 Management Software Menus User’s Guide
Section II: Advanced Operations 291
3 - Detailed Ports Status Menu
When you select this option, you are prompted to enter the port(s) you
want to view. You can specify more than one port at a time. Once you
have specified the port, the selection displays the following window:
Figure 116. PoE Summary Ports Status Menu
The selections in this window are for viewing purposes only. Each
selection is described below.
Port
Port number.
PoE Function
Whether PoE is enabled or disabled on the port. The default setting is
enabled. To enable or disable PoE on a port, refer to “Configuring PoE
Port Settings” on page 286.
Power Status
Whether power is being supplied to the device. ON means that the port
is providing power to a powered device. OFF means the device is not a
powered device, PoE has been disabled on the port, or no device is
connected to the port.
Power Consumed
The amount of power in milliwatts currently consumed by the powered
device connected to the port. If the port is not connected to a powered
device, this value will be 0 (zero).
Power Limit
The maximum amount of power allowed by the port for the device. The
default is 15,400 milliwatts (15.4 W). To adjust this value for a port,
refer to “Configuring PoE Port Settings” on page 286.
Allied Telesis AT-924T/POE - AT-S63
Production Switch
User: Manager 11:20:02 02-Jan-2008
PoE Detailed Port Status
Port: 4
PoE Function ........... ENABLED
Power Status ........... ON - Valid PD detected
Power Consumed ......... 1,900 mW
Power Limit ............ 15,400 mW
Power Priority ......... Low
Power Class ............ 1
Voltage ................ 48.6V
Current ................ 40 mA
U - Update Display
R - Return to Previous Menu
Enter your selection?