Filter
Top Products
AT-S63 Management Software Menus User’s Guide
Section II: Advanced Operations 187
The file immediately begins downloading onto the switch. The
Xmodem File Send window in Figure 60 displays the current status of
the download.
Figure 60. XModem File Send Window
The download is complete when the Downloads and Uploads menu is
redisplayed.
14. If you downloaded a configuration file and want to make it the active
boot file on the switch, refer to “Setting the Active Boot Configuration
File” on page 149. If you downloaded a CA certificate, refer to “Adding
a Certificate to the Database” on page 616.
This completes the procedure for downloading a file into the switch’s
file system or flash memory card from a local management session
using Xmodem.
Downloading a
System File from
a Remote
Management
Session
Review “Guidelines” on page 182 before performing this procedure.
To download a system file onto a switch from a remote management
session using TFTP, perform the following procedure:
1. Establish a remote management session on the switch where you
intend to download the new file.
2. From the Main Menu, type 5 to select System Administration.
The System Administration menu is shown in Figure 1 on page 32.
3. From the System Administration menu, type 9 to select System
Utilities.