Filter
Top Products
Chapter 2: Port Parameters
62 Section I: Basic Operations
Displaying Port Status
To display the current status of the ports on the switch, perform the
following procedure:
1. From the Main Menu, type 1 to select Port Configuration.
The Port Configuration menu is shown in Figure 13.
Figure 13. Port Configuration Menu
2. From the Port Configuration menu, type 2 to select Port Status.
An example of the Port Status menu is shown in Figure 14.
Figure 14. Port Status Menu
Allied Telesis AT-9424T/SP - AT-S63
Marketing
User: Manager 11:20:02 02-Mar-2005
Port Configuration
1 - Port Configuration
2 - Port Status
3 - Port Statistics
4 - Port Trunking and LACP
5 - Port Security
6 - Port Mirroring
R - Return to Previous Menu
Enter your selection?
Allied Telesis AT-9424T/SP - AT-S63
Marketing
User: Manager 11:20:02 02-Mar-2005
Port Status
Port Link Neg MDIO Speed Duplex PVID PortType
----------------------------------------------------------------
17 Up Auto MDI 1000 Full 12 10/100/1000Base-T
18 Up Auto MDI 100 Full 12 10/100/1000Base-T
19 Up Auto MDI 1000 Full 21 10/100/1000Base-T
20 Up Auto MDI 100 Full 21 10/100/1000Base-T
21 Up Auto MDI 100 Full 21 10/100/1000Base-T
22 Up Auto MDI 1000 Full 4 10/100/1000Base-T
23 Down ---- ---- ---- ---- ---- 10/100/1000Base-T
24 Up Auto MDI 1000 Full 21 10/100/1000Base-T
P - Previous Page
U - Update Display
R - Return to Previous Menu
Enter your selection?