Filter
Top Products
User's Guide
D-6 Code Sets
Table D-2. AMT and Diablo 630 Control Codes––continued
Function ASCII Hexadecimal Decimal Description
Enable characters with ..... SO 0E 14 9 If an ECS font is active and 8-bit data is in use, this code
codes outside normal range permits the printing of characters with codes from 80 to
(continued) 9F hex. An SI code cancels this function.
9 If an ECS font is active and 7-bit data is in use, this code
permits the printing of characters with codes above 7F
hex. After receiving an SO code, the printer adds 80 hex
to all subsequent codes it receives and prints the result-
ing characters. An SI code cancels this function.
Disable characters with..... SI 0F 15 This code causes one of the following actions:
codes outside normal range
9 If an ECS font is active and 8-bit data is in use, this code
cancels the printing of characters with codes from 80 to
9F hex. After receiving an SI code, the printer prints
spaces for these codes.
9 If an ECS font is active and 7-bit data is in use, this code
cancels the printing of characters with codes above
7F hex.
Print character with .......... EM 19 25 If an ECS font is not active and 7-bit data is in use, this
code above 7F hex code permits the printing of a character with a code above
7F hex. When the printer receives an EM code, it adds
80 hex to the next code it receives and prints the resulting
character. This function affects only the next code in the
data stream.
Escape ................................ ESC 1B 27 This code begins an escape sequence.
Print character with .......... GS 1D 29 If an ECS font is not active, this code permits the printing
code below 20 hex of a character with a code below 20 hex. After receiving
a GS code, the printer does not perform the normal control
function for the next code it receives, but instead prints the
assigned character. This function affects only the next code
in the data stream.
Space .................................. SP 20 32 This code moves the current print position one character
space to the right.
Delete .................................. DEL 7F 127 The printer ignores this code unless the code is used within
an escape sequence.
User's Guide
D-6 Code Sets
Table D-2. AMT and Diablo 630 Control Codes––continued
Function ASCII Hexadecimal Decimal Description
Enable characters with ..... SO 0E 14 9 If an ECS font is active and 8-bit data is in use, this code
codes outside normal range permits the printing of characters with codes from 80 to
(continued) 9F hex. An SI code cancels this function.
9 If an ECS font is active and 7-bit data is in use, this code
permits the printing of characters with codes above 7F
hex. After receiving an SO code, the printer adds 80 hex
to all subsequent codes it receives and prints the result-
ing characters. An SI code cancels this function.
Disable characters with..... SI 0F 15 This code causes one of the following actions:
codes outside normal range
9 If an ECS font is active and 8-bit data is in use, this code
cancels the printing of characters with codes from 80 to
9F hex. After receiving an SI code, the printer prints
spaces for these codes.
9 If an ECS font is active and 7-bit data is in use, this code
cancels the printing of characters with codes above
7F hex.
Print character with .......... EM 19 25 If an ECS font is not active and 7-bit data is in use, this
code above 7F hex code permits the printing of a character with a code above
7F hex. When the printer receives an EM code, it adds
80 hex to the next code it receives and prints the resulting
character. This function affects only the next code in the
data stream.
Escape ................................ ESC 1B 27 This code begins an escape sequence.
Print character with .......... GS 1D 29 If an ECS font is not active, this code permits the printing
code below 20 hex of a character with a code below 20 hex. After receiving
a GS code, the printer does not perform the normal control
function for the next code it receives, but instead prints the
assigned character. This function affects only the next code
in the data stream.
Space .................................. SP 20 32 This code moves the current print position one character
space to the right.
Delete .................................. DEL 7F 127 The printer ignores this code unless the code is used within
an escape sequence.