Filter
Top Products
User's Guide
3-4 Loading Paper
Loading Forms
Figure 3-2. Attaching the Support Extenders
You load forms from the top of the printer.
After loading a form, the printer automati-
cally positions it to the first printable line.
After printing, the printer ejects the form.
If the printer has more information to print,
the LOAD PAPER message appears on the
control panel display to notify you.
To load a form, use this procedure:
1. Move the tractor select lever to activate
the top path ( ).
2. Raise the paper support. If necessary for
long forms, attach the paper support
extenders, as shown in figure 3-2.
3. Squeeze the rear clip on the left paper
edge guide and position the guide so that
it aligns with the "0" ( ) on the paper
scale.
4. Set a sheet into the left paper edge guide.
Then, squeeze the rear clip on the right
paper edge guide and position the guide
up against the right edge of the form, as
shown in figure 3-3.
5. Press the Form Feed button. The form
will advance into the printer.
) Note: Use of the right paper edge guide
is highly recommended for long, multi-
sheet forms printing.
Figure 3-3. Loading a Form
User's Guide
3-4 Loading Paper
Loading Forms
Figure 3-2. Attaching the Support Extenders
You load forms from the top of the printer.
After loading a form, the printer automati-
cally positions it to the first printable line.
After printing, the printer ejects the form.
If the printer has more information to print,
the LOAD PAPER message appears on the
control panel display to notify you.
To load a form, use this procedure:
1. Move the tractor select lever to activate
the top path ( ).
2. Raise the paper support. If necessary for
long forms, attach the paper support
extenders, as shown in figure 3-2.
3. Squeeze the rear clip on the left paper
edge guide and position the guide so that
it aligns with the "0" ( ) on the paper
scale.
4. Set a sheet into the left paper edge guide.
Then, squeeze the rear clip on the right
paper edge guide and position the guide
up against the right edge of the form, as
shown in figure 3-3.
5. Press the Form Feed button. The form
will advance into the printer.
) Note: Use of the right paper edge guide
is highly recommended for long, multi-
sheet forms printing.
Figure 3-3. Loading a Form