Filter
Top Products
User's Guide
4-30 Control Panel
Set Right Margin
RGT MAR lets you specify a right margin. When printing reaches the
right margin on a line, the printer performs a carriage return/line feed
and continues printing on the next line. The right margin is also used in
the center and justify modes. The right margin can be from 1 to 320
character spaces to the right of the far left print position; however, you
can only select a character space that is to the right of the left margin
setting. To help you visualize right margin locations as you scroll through
the possible settings, the carriage moves to the displayed setting. The
physical position of the right margin on the page is unaffected by subse-
quent changes to horizontal spacing (character pitch).
31)RGT MAR: 136
Turn Automatic Form Feed Mode
On and Off
AUTO FF lets you turn the automatic form feed mode on and off. In the
automatic form feed mode, the printer skips over the perforations of pin-
feed paper by setting the top and bottom margins to one-half inch. You
can select On to turn the automatic form feed mode on; or Off to turn the
mode off. For the automatic form feed mode to work correctly, the
LENG (form length) parameter must be set to the correct form length.
32) AUTO FF: Off
User's Guide
4-30 Control Panel
Set Right Margin
RGT MAR lets you specify a right margin. When printing reaches the
right margin on a line, the printer performs a carriage return/line feed
and continues printing on the next line. The right margin is also used in
the center and justify modes. The right margin can be from 1 to 320
character spaces to the right of the far left print position; however, you
can only select a character space that is to the right of the left margin
setting. To help you visualize right margin locations as you scroll through
the possible settings, the carriage moves to the displayed setting. The
physical position of the right margin on the page is unaffected by subse-
quent changes to horizontal spacing (character pitch).
31)RGT MAR: 136
Turn Automatic Form Feed Mode
On and Off
AUTO FF lets you turn the automatic form feed mode on and off. In the
automatic form feed mode, the printer skips over the perforations of pin-
feed paper by setting the top and bottom margins to one-half inch. You
can select On to turn the automatic form feed mode on; or Off to turn the
mode off. For the automatic form feed mode to work correctly, the
LENG (form length) parameter must be set to the correct form length.
32) AUTO FF: Off