Filter
Top Products
7-34 Changing Objects
You’ll see the a Properties screen with tabs and options appropriate
to the object selected. This is a sample Text Properties screen:
Figure 7-16. A generic Properties General tab.
The values shown on the screen are the current values of the selected
text object.
Note: Object Properties screens are not accessible from the Pipe
Marker or Right-To-Know applications. You must use the
<Preferences> key to change properties for those specialty
applications.
Setting options on the General tab
The General tab appears on the Properties screens for every type of
object. Use the options on the General tab to set the rotation, the fill,
the cut options, the line width, and to begin the select color process
Note: As noted below, options offered on the General tab vary
according to your system features.
Available on
Color & Cut
system only
Available on
all systems,
for all objects.
For bar
codes, limited
to 0 and 90.
Available on all
systems, for all
objects
Available on
all systems,
for all objects
Print object is
assumed on
Monocolor
and Multicolor
systems