Filter
Top Products
Basic Procedures 4-9
Selecting multiple objects
To select multiple objects on a label, hold down the Shift key, then use
either of the methods described above.
Deselecting in the Editor window
You can deselect an object after you perform an action on a selected
object, or if you change your mind before you make changes to the
selected item.
To remove the selection markers, touch any non-highlighted area of the
screen. If you are using a mouse, move the cursor to a non-highlighted
area and click the left mouse button to deselect.
Undoing in the Editor window
You can use this tool to reverse or undo your most recent action in the
Editor window:
The Undo icon is not valid at all times, however, as some formatting
actions cannot be undone. When Undo is not possible, this icon will be
grayed out (or appear to be dimmer) on the toolbar.
Working in Entry Screens
Entry screens are screens upon which you enter the parts that make up
your label and in which you enter information about the design of your
label. You enter label text and information about your label by using:
Text entry areas
Entry fields
Buttons
Checkboxes
Radio buttons
Size adjustment buttons
Screens usually contain one or more of these information entry devices,
as shown in Figure 4-6 on page 4-12 and Figure 4-7 on page 4-13.