Filter
Top Products
Starting Up 3-7
Copy F9 Copies the selected object and makes it
available for pasting into a new location,
leaving the original in its current location
(the standard Microsoft Windows “Copy”
function). If no object is selected, the
system beeps.
Paste F10 Pastes the object in memory into a new
location on the label (the standard
Microsoft Windows “Paste” function). If
nothing has been copied into memory
previously, the system beeps.
Undo F11 Reverses the previous action. Undo affects
the most recent set of editing changes to an
object. If the previous action cannot be
undone, the system beeps. Undoing the last
several actions is possible in some cases,
depending on system memory. Redoing
actions is not supported.
Menu F12 Closes the current application and displays
the system’s Main Menu screen, allowing
the user to select a different application
without restarting the system.
Advance &
Shear
Alt+F2 Advances the supply such that any printing
currently under the print head clears the
cutter and shears it from the tape. “Shear”
should not be confused with the cut
operation performed by the plotter cutter
(cutting out shapes, label borders, etc.).
Clear Alt+F3 Displays the Clear screen, providing
options for the user to clear the current
label or all labels in the current set.
TABLE 3-1. System function keys and definitions (Continued)