Filter
Top Products
Troubleshooting and Maintenance 144
MAINTENANCE
6
Hold the new ink cartridge as shown in the illustration, and remove the sealing tape from the
side of the ink cartridge. Carefully peel the tape in the direction away from you.
7
Each colour has its own correct position. Insert each new ink cartridge into the carriage, and then
press the ink cartridge cover until it clicks.
8
After installing the ink cartridges, close the Scanner Cover. The machine prepares for a “head
cleaning” and goes online. The display prompts you to verify a new ink cartridge was inserted
for each colour you removed. Example: DID YOU CHANGE BLCK? 1.YES 2.NO.
If the ink cartridge you installed is not a brand new one, please make sure to select 2.
9
For each new cartridge, press 1 on the dial pad to reset the ink dot counter for that colour
automatically.
The machine will enter a cleaning cycle for approximately three minutes for each replaced
cartridge. The display alternately shows CLEANING and PLEASE WAIT.
When the machine completes the cleaning cycle, the display returns to Standby mode (date and
time).
To prevent spilling ink and staining your hands and clothing, remove the sealing
tape gently.
If ink gets in your eyes, irrigate them with water immediately and consult a
doctor if you are concerned.
Opening
Peel in the direction
away from you!