Filter
Top Products
Using the Windows
®
-Based Brother MFL-Pro Control Centre 84
PRINTER/SCANNER
Setting Up the Scanner Configurations
The Pop-Up application stores eight different scanning modes. Each time you scan an original, you
will choose the most appropriate scanning mode from the following:
Faxing, Filing and Copying
Text for OCR
Photos
Photos (High Quality)
Photos (Quick Scan)
Custom
Draft Copy
Fine Copy
Each mode has its own set of stored settings. You can keep the factory default settings or change
them at any time:
Resolution—Select the scanning resolution you most frequently use.
Colour Mode—From the pull-down list, select
Scan Size—From the pull-down list, select
Brightness—Slide the adjuster from 0% to 100%
Contrast—Slide the adjuster from 0% to 100%
Click OK to save your changes. If you make a mistake or later decide to return to the original default
setting, just click the Restore Defaults button when the scanning mode is displayed.
To Access the Scanner Configurations Screen
1
Place the original face up in the Automatic Document Feeder. Then the Brother Control Centre
screen pops up.
2
Right-click the appropriate Control Centre button to display Configurations…, then click it.
The configuration screen for that Control Centre button will appear.
3
To save your settings, press the OK button—OR—To return to the factory default settings,
press the Restore Defaults button.
Perform an Operation from the Control Centre Screen
If you see this screen it means you left-clicked a button in the Control Centre window without first
placing an original in the Automatic Document Feeder.
Place the original in the Brother machine’s Automatic Document Feeder, then click OK to return to the
Control Centre screen.
You can not access the Scanner Configuration screen by placing the document on
the glass platen.
If you want to scan the original from the glass platen, please use Scan to key on
the Control Centre screen.