Filter
Top Products
BASIC FAX USE
Setup 16
1
Setup
Initial Settings
Setting Paper Type
To achieve the best print results you should choose the Paper Type according to the paper you use.
1
Press Menu/Set, 1, 1.
2
Press or to select PLAIN, INK JET, GLOSSY or TRNSPRNCY
(TRANSPARENCY), and then press Menu/Set.
3
If you selected GLOSSY, press or to select GLOSSY:4-COLOUR or GLOSSY:3-
COLOUR, and then press Menu/Set.
4
Press Stop/Exit.
Setting the Date and Time
The machine displays the date and time, and prints it on every fax you send.
In the event of a power failure, the machine maintains date and time information for several hours.
All other settings remain unaffected.
1
Press Menu/Set, 1, 2.
2
Enter the two digits of the year, and press Menu/Set. “02” is registered as 2002 in the machine.
3
Enter two digits for the month and press Menu/Set.
4
Enter two digits for the day and press Menu/Set.
5
Enter the time in 24 hour format and press Menu/Set.
6
Press Stop/Exit.
The print quality of black ink varies depending on the kind of glossy paper you are
using. Black ink is used when you select GLOSSY:4-COLOUR. If the glossy paper
you are using repels the black ink, select GLOSSY:3-COLOUR, which simulates
black ink by combining the three ink colours.
The machine ejects paper with printed surfaces face up onto the paper tray in the
front of the machine. When you use transparencies, remove each sheet
immediately to prevent a paper jam or curling sheets.