Filter
Top Products
Making Copies 56
COPIER
Using the Options Key
The Options key changes the settings for number of copies, paper type, brightness, stack/sort and
special copy options for the next copy only. See the explanation below the table.
Paper Type
You can change the setting of paper type for next copy only.
1
Insert the original face up in the Automatic Document Feeder, or face down on the glass platen.
2
Press Options.
3
Press or to select PAPER TYPE, and then press Menu/Set.
4
Press or to select the type of paper you are using (PLAIN, INK JET, GLOSSY or
TRANSPARENCY), and press Menu/Set.
5
If you selected GLOSSY, press or to select 4-COLOUR or 3-COLOUR, and then
press Menu/Set.
6
Press Mono Copy or Colour Copy—OR—Press or for additional settings.
Copy Brightness
1
Insert the document face up in the feeder, or face down on the glass platen.
2
Press Options and Press or to select
BRIGHTNESS, and then press Menu/Set.
3
Press to make a lighter copy—OR—Press to make a darker copy, and then press
Menu/Set.
4
Press Mono Copy or Colour Copy—OR—Press or for additional settings.
Press Options Menu Selections Options Factory Setting
NO. OF COPIES NO. OF COPIES:XX 01
PAPER TYPE PLAIN/INK JET/
GLOSSY (4-COLOUR
or 3-COLOUR)/
TRANSPARENCY
PLAIN
BRIGHTNESS – + – +
STACK/SORT STACK/SORT STACK
SPECIAL 2IN1/4IN1/
POSTER/OFF
OFF
The print quality of black ink varies depending on the kind of glossy paper you are
using. Black ink is used when you select 4-COLOUR. If the glossy paper you are
using repels the black ink, select 3-COLOUR, which simulates black ink by
combining the three ink colours.
– +