Filter
Top Products
Making Copies 54
COPIER
Temporary Copy Setting
You can improve your copies by using the Copy keys: Enlarge/Reduce, Quality, and Options.
These settings are temporary, and the machine returns to its default settings 30 seconds after it
finishes copying. If you want to use these temporary settings again, place the next document in the
Automatic Document Feeder or glass platen before 30 seconds expire.
Copying Using Multiple Settings
You can try different combinations of settings for the best results. After you finish your settings
using the Enlarge/Reduce, Quality and Options keys.
The LCD shows:
■ Press or if you want to select additional settings.
—OR—
Press Mono Copy or Colour Copy if you are finished choosing settings.
Using the Quality Key
The Quality key changes the settings for copy quality (NORMAL,
FAST or BEST).
Press Quality continuously or press or after pressing Quality until you see the indicator
lights change.
1
Insert the document face up in the Automatic Document Feeder, or face down on the glass platen.
2
Press Quality.
3
Press or to select the copy quality resolution, and then press Menu/Set.
4
Press Mono Copy or Colour Copy—OR—Press or for additional settings.
Press
Quality
and
NORMAL Recommended mode for ordinary printouts. Good copy quality with
adequate copy speed.
FAST Fast copy speed and lowest ink consumption. Use FAST to save time
(documents to be proof-read, large documents, or many copies).
BEST Use this mode to copy precise images such as photographs. BEST
uses the highest resolution and slowest speed.
Copy Keys
PRESS COPY OR
FOR NEXT OPT.
or