Filter
Top Products
25 Chapter 2
Real Time Transmission
When you are sending a fax, the machine will scan documents into memory before sending. Then,
as soon as the phone line is free, the machine will start dialling and sending the fax. If memory
becomes full, the machine will send the document in real time (even if REAL TIME TX is set to
OFF).
Sometimes you may want to send an important document immediately, without waiting for memory
transmission. You can set REAL TIME TX to ON.
1
Insert the document face up in the Automatic Document Feeder, or face down on the glass
platen.
2
Press Menu/Set, 2, 2, 5.
3
To change the default setting, press or to select ON (or OFF) and press Menu/Set.
Go to Step 6—OR—For the next fax transmission only, press or to select NEXT FAX
ONLY.
4
Press Menu/Set.
5
For the next fax only, press or to select ON (or OFF) and press Menu/Set.
6
Press 1 if you want to select additional settings. The display returns to the SETUP SEND
menu—OR—Press 2 if you have finished choosing settings and go to Step 7.
7
If you switched ON Real Time Transmission for the next fax only, enter the fax number and
press Mono Fax Start.
This setting has no effect on Colour faxes. Colour faxes are always sent by using
Real Time Transmission.