Filter
Top Products
Bridging
4-64 The Port Source Addresses Window
Figure 4-17. Find Source Address Window
3. In the text field in the middle of the window, enter a valid MAC address in
hexadecimal format and then click OK.
If the address is found in the 802.1d Bridge Filtering Database, the port through
which the address is communicating will ßash in the front panel Chassis View
display.
If the address is not found in the Filtering Database, a separate window will
appear with a ÒCanÕt Find Source AddressÓ message.
The Port Source Addresses Window
You can use the port-level Source Addresses window to view all the MAC
addresses that are communicating through a selected bridge interface.
To open the Source Addresses window
from the Bridge Status window:
1. Click on the desired Port button ( ) to display the port menu.
2. Drag down to select Source Addressing…. The following window,
Figure 4-18, will appear.
from the Chassis View window:
1. Click on the appropriate port index to access the Port menu.
2. Drag down to select Source Addressing…. The following window,
Figure 4-18, will appear.