Filter
Top Products
Duplex Modes 4-69
Bridging
Ethernet Port Configuration Window
You can also conÞgure duplex modes from the Port ConÞguration window.
To access the Port ConÞguration window:
from the Bridge Status window:
1. Click on the desired Port button ( ) to display the port menu.
2. Drag down to select Configuration…. The Port Configuration window for the
selected Ethernet interface, Figure 4-21, will appear.
from the Chassis View window:
1. Click on the appropriate port index to access the Port menu.
2. Drag down to select Configuration…. The Port Configuration window for the
selected Ethernet interface, Figure 4-21, will appear.
Figure 4-21. Port ConÞguration Window
This window will indicate which mode is being used on the interface, standard
mode or full duplex mode.
Standard Mode
Standard mode is being used on this interface. In standard mode, the interface can
transmit or receive packets. The interface has to wait for one activity to be
completed before switching to the next activity (receive or transmit).
Full Duplex
Full duplex mode is being used on this interface. In full duplex mode, the
interface receives and transmits packets at the same time.