Filter
Top Products
Bridging
4-26 Bridge Statistics
Collision Errors
Single
Displays the number of successfully transmitted frames on the selected interface
for which transmission was prevented by one collision.
Multiple
Displays the number of successfully transmitted frames on the selected interface
for which transmission was prevented by more than one collision.
Late
Displays the number of times that a collision has been detected on this interface
later than 51.2 microseconds into the transmission of the packet on a 10 Mbit/s
system or later than 5.12 microseconds on a 100 Mbit/s system.
Excessive
Displays the number of frames from this interface for which transmission was not
complete due to excessive collisions.
Collision Errors
Displays the total number of collision errors of all types that occurred during
transmission from this interface.
The PPP Link Statistics Window
The PPP Link Status menu option opens the PPP Link Statistics window, which
enables you to view color-coded statistics related to the PPP (Point-to-Point
Protocol) link at the selected interface.
The Point-to-Point Protocol is a standard method of transporting multiprotocol
datagrams over point-to-point links. A PPP Link provides full-duplex
communication between the endpoints, allowing a simultaneous bidirectional
operation that should maintain the order in which data packets are transmitted.
To access the PPP Link Statistics window
from the Bridge Status window:
1. Click on the desired Port button ( ) to display the port menu.
2. Drag down to select PPP Link Status…. The device port PPP Link Statistics
window, Figure 4-7, will appear.
from the Chassis View window:
1. Click on the appropriate port index to access the Port menu.
2. Drag down to select PPP Link Status…. The device port PPP Link Statistics
window, Figure 4-7, will appear.