Filter
Top Products
Using the Interface Configuration Window 4-89
Bridging
Using the Interface Configuration Window
The I/F ConÞguration port-level menu option invokes the Interface
ConÞguration window, which allows you to select a bridging method for a Token
Ring bridging interface. You can also make this selection via the Token Ring
Bridge Mode window; see Token Ring Bridge Mode, page 4-83, for more
information.
This window also allows you to select one of three transmission methods that
should be used when unknown addresses are received from end stations attached
to the selected bridge port.
To access the Interface ConÞguration window
from the Bridge Status window:
1. Click on the desired Port button ( ) to display the port menu.
2. Drag down to select I/F Configuration…. The Interface Configuration
window, Figure 4-29, will appear.
from the Chassis View window:
1. Click on the appropriate port index to access the Port menu.
2. Drag down to select I/F Configuration…. The Interface Configuration
window, Figure 4-29, will appear.