Filter
Top Products
WAN Logical View 3-7
CSX200 and CSX400 WAN Configuration
Figure 3-2. WAN Logical Settings Window
2. Click on the Protocol button to select PPP, Frame Relay, or None. LEX (LAN
Extender) may also appear in the Protocol menu, but it is not applicable to a
CSX device.
3. After making your changes, click on OK to exit the window and save the
changes, or Cancel to exit the window without saving the changes.
Note that this window also displays the state of compression on the interface.
After exiting the Logical Settings window, the WAN Logical View window will
update with the changes you made.
NOTE
If you do make any conÞguration changes through the WAN Logical Settings window,
make sure they donÕt conßict with other conÞgurations made through the QuickSET
application.