Filter
Top Products
CSX200 and 400 Chassis View
2-6 Viewing Chassis Information
¥ I/F Speed will display the speed (10 or 100 Mbits/sec) of the network segment
attached to each port. The speed of the network management port will be
displayed in Kbits/sec.
¥ I/F Type will display the interface type of each port in the CSX200/400 Ñ i.e.,
Eth (ethernet-csmacd) for the bridging interfaces, and PPP for the network
management port.
For more information on the port display options available via this menu, see The
CSX200/400 Port Status Displays, later in this chapter.
The Utilities Menu
From the Utilities menu you can select:
¥ MIB Tools, a utility provided by SPECTRUM Element Manager for use with
the CSX200/400. The MIB Tools utility provides direct access to the
CSX200/400Õs MIB information. This selection is also available from the T
ools
menu at the top of SPECTRUM Element ManagerÕs main window. Refer to
your SPECTRUM Element Manager Tools Guide for more information on
the MIB Tools utility.
¥ Router ConÞg, for launching the Basic Router application. Basic routing is
described in its own UserÕs Guide, and can also be launched from the Tools
menu.
¥ RMON, for launching the Remote Network Monitoring application. RMON is
described in its own UserÕs Guide. Like MIB Tools and Basic Router, RMON
can also be launched from the Tools menu at the top of SPECTRUM Element
ManagerÕs main window. RMON is supported by the CSX400 only.
The Help Menu
The Help Menu has three selections:
¥ MIBs Supported, which brings up the Chassis Manager window, described
later in this chapter.
¥ Chassis Manager Help, which brings up a help window with information
speciÞcally related to using the Chassis Manager and Chassis View windows.
¥ About Chassis Manager..., which brings up a version window for the Chassis
Manager application in use.
The Port Menus
The menu for bridging ports offers the following selections:
NOTE
You will be able to launch the QuickSET application from the Utilities menu, provided it
is installed on your machine. See your QuickSET documentation for more information.