Filter
Top Products
120 Authorized Send Installation and Configuration Guide for imageRUNNER Machines
5. Enter a syslog server’s IP address under <Syslog Server> in the table ➞ enter the
corresponding UDP port number for the syslog server under <UDP Port> in the
table.
You can configure up to three syslog servers. You can enter a maximum of five
numbers for the UDP port.
6. Click [Save].
7. To view the log file, click [Current Log] or [History Log] (if available).
A browser window opens to display a snapshot of the contents of the log file.
NOTE
• The log file contents displayed are not live. To view the latest contents of the log
file, you must close the log window ➞ refresh the Authorized Send Configuration
servlet ➞ click [Current Log] to open a new browser window.
• [History Log] only appears after the current log reaches a maximum size of
512 KB. Once the current log reaches the maximum size, it replaces the history
log (if it exists), or creates a new history log.
8. To download the log file, right-click [Current Log] or [History Log] ➞ select [Save
Target As] ➞ select a location to save the file.
NOTE
If HTTPS is being used for the Configuration servlet, you must first open the log
file (by clicking [Current Log] or [History Log]), and then save the log file (by
clicking [File] ➞ [Save As]). Right-clicking [Current Log] or [History Log] does
not work with HTTPS enabled.