Filter
Top Products
Authorized Send Installation and Configuration Guide for imageRUNNER Machines 97
3.10 Configuring Scan to Fax Settings
You can enable the Scan to Fax function and configure the General Settings.
1. Click [Scan to Fax].
If necessary, see the screen shot in step 12 of
“Flow of Configuration Operations,”
on p. 35.
2. Click the [Enable Scan to Fax] check box.
If you want to disable the Scan to Fax function, click the [Enable Scan to Fax]
check box to clear the check mark.
NOTE
• The Scan to Fax function is disabled by default.
• You can only disable the Scan to Fax function if there is at least one other
Authorized Send function enabled.