Filter
Top Products
160 Authorized Send Installation and Configuration Guide for imageRUNNER Machines
6.1.10 Options Screen Error Messages
This section explains the Options screen error messages, along with possible causes
and remedies. For more information on the remedies, see
“Configuring Optional
Settings,” on p. 113.
Message Cause Remedy
Configuration Session
Timeout cannot be zero.
Zero is entered in the
[Configuration Session
Timeout (min)] text box.
Enter a numeric value greater than
zero for the configuration session
timeout.
Configuration Session
Timeout cannot exceed 60
minutes.
A number greater than 60 is
entered in the [Configuration
Session Timeout (min)] text
box.
Enter a number less than or equal
to 60 for the configuration session
timeout.
Configuration Session
Timeout has to be a
number.
A non-numeric value is
entered in the [Configuration
Session Timeout (min)] text
box.
Enter a numeric value for the
configuration session timeout.
Configuration Session
Timeout needs to be set.
The [Configuration Session
Timeout (min)] text box is
blank.
Enter a numeric value for the
configuration session timeout.
Configuration Session
Timeout needs to be a
positive number.
A negative value is entered in
the [Configuration Session
Timeout (min)] text box.
Enter a positive numeric value
between 1 and 60 for the
configuration session timeout.
Network Socket Timeout
cannot be zero.
Zero is entered in the
[Network Socket Timeout
(seconds)] text box.
Enter a numeric value greater than
zero for the network socket
timeout.
Network Socket Timeout
needs to be a positive
number.
A negative value is entered in
the [Network Socket Timeout
(seconds)] text box.
Enter a numeric value greater than
zero for the network socket
timeout.
Network Socket Timeout
cannot exceed 30 seconds.
The number entered in the
[Network Socket Timeout
(seconds)] text box is greater
than 30.
Enter a number less than or equal
to 30 for the network socket
timeout.
Network Socket Timeout
has to be a number.
A non-numeric value is
entered in the [Network Socket
Timeout (seconds)] text box.
Enter a numeric value for the
network socket timeout.
Network Socket Timeout
needs to be set.
The [Network Socket Timeout
(seconds)] text box is blank.
Enter a numeric value for the
network socket timeout.
The application display
name is too long.
Maximum length is 20
characters.
The application display name
entered in the [Application
Display Name (up to 20
characters)] text box exceeds
20 characters.
Make sure the application display
name does not exceed 20
characters.