Printing Received Documents
5-63
5
Customizing Fax Settings
2 On 1 Log
This mode enables you to print two received documents of the same paper size on
a single sheet of paper.
The 2 On 1 Log mode is available only under the following conditions:
• The same paper drawer must be selected for printing two consecutive pages of
the received document.
• The paper in the selected paper drawer must be large enough for two consecutive
pages to be printed.
- Example: If the LTR paper drawer is empty, but the 11" x 17" paper drawer is
loaded, you can print two LTR documents onto a single sheet of 11" x 17" paper.
NOTE
•
When the 2 On 1 Log mode is set to 'On', documents are printed with a dotted line in the
middle. If the document is received with sender information, the dotted line is not printed
in the area where the sender information is located.
•
The default setting is 'Off'.
1
Press (Additional Functions) ➞ [Custom Fax Settings] ➞
[Printer Settings].
If necessary, see the screen shots in steps 1 and 2 of "Paper Drawer Selection,"
on p. 5-54.
2
Press [2 On 1 Log].