Filter
Top Products
Canceling a Job
1-46
1
Introduction to Fax Functions
● To cancel a Sequential Broadcast:
❑
Select the Sequential Broadcast job to be canceled ➞ press [Details] ➞
[Broadcast List] to verify the destinations of the fax job.
❑ Press [Done] repeatedly until the Status screen appears ➞ press [Cancel].
❑ Press [All] or [Only One].
If you select [Only One], the job that is currently being sent is canceled.
If you do not want to cancel any job of the Sequential Broadcast, press [Don't
cancel].
The message <Canceling...> appears for approximately two seconds on the
touch panel display.
The fax job is canceled.
NOTE
The canceled job is displayed as <NG> (No Good) on the Log screen.