Filter
Top Products
Making Prints Using the Stack Bypass
2-44
2
Basic Operations
NOTE
•
If there are instructions on the paper package about which side of the paper to
load, follow those instructions.
•
When the paper is loaded into the stack bypass, the side facing down is the one
printed on.
•
If problems, such as poor print quality or paper jams occur, try turning the paper
stack over and reload it.
•
For more information on the print direction of preprinted paper (paper which has
logos or patterns already printed on it), see "Relationship between Original
Orientation and Preprinted Paper Output Chart," on p. 9-25.
● If you are loading envelopes into the stack bypass:
❑
Take five envelopes, loosen them as shown, and then stack them together.
Repeat this step five times for each set of five envelopes.
❑ Place the envelopes on a clean, level surface, and press all the way around the
envelopes by hand, in the direction of the arrows, to remove any curls. Repeat
this step five times for each set of five envelopes.