Filter
Top Products
System Configuration
3-4
3
Optional Equipment
a Platen Cover Type H
The Platen Cover Type H secures the originals
placed on the platen glass.
b Feeder (DADF-N1)
Originals placed in the feeder are automatically
fed sheet by sheet onto the platen glass for
scanning. The feeder also automatically turns
over two-sided originals to make one or
two-sided copies.
The Feeder (DADF-N1) is standard-equipped for
the imageRUNNER 3045/3035.
c Card Reader-C1
The Card Reader-C1 enables Department ID
Management to be performed automatically.
d Copy Tray-J1
The Copy Tray-J1 provides an additional paper
output tray.
e Paper Deck-Q1
The Paper Deck-Q1 provides an additional
source of paper for printing jobs.
The Paper Deck-Q1 holds up to 2,700 sheets of
paper (20 lb bond (80 g/m
2
)).
f Cassette Feeding Unit-Y3
The Cassette Feeding Unit-Y3 provides two
additional sources of paper for printing jobs.
Each paper drawer holds up to 550 sheets of
paper (20 lb bond (80 g/m
2
)).
g Inner 2 Way Tray-D1
The Inner 2 Way Tray-D1 is equipped with the
following features: Collate, Group, and Rotate.
h Envelope Feeder Attachment-C2
The Envelope Feeder Attachment-C2 can only
be attached to Paper Drawer 1, and holds only
envelopes.
i Puncher Unit-R1
The Puncher Unit-R1 can be attached to the
optional Finisher-S1, and is equipped with the
Hole Punch mode.
j Finisher-S1
The Finisher-S1 is equipped with the following
modes: Collate, Group, Offset, and Staple
(Corner).
k Additional Finisher Tray-B1
The Additional Finisher Tray-B1 can be attached
to the optional Finisher-S1 to provide an
additional paper output tray.
l Finisher-AE1
The Finisher-AE1 is equipped with the following
modes: Collate, Group, Offset, and Staple
(Corner and Double).
m Buffer Pass Unit-E2
The Buffer Pass Unit-E2 is required to attach the
Finisher-AE1 or Saddle Finisher-AE2 to the main
unit.
n Puncher Unit-M1
The Puncher Unit-M1 can be attached to the
optional Finisher-AE1 or Saddle Finisher-AE2,
and is equipped with the Hole Punch mode.
o Staple Cartridge-D2/D3
The Staple Cartridge-D2/D3 can be attached to
the optional Saddle Finisher-AE2 for saddle
stitching.
p Staple-J1
The Staple-J1 can be attached to the optional
finisher for stapling (Corner and Double).
l
m
q
p
o
n