Canon 3030 All in One Printer User Manual


 
Specifying Common Settings
4-39
4
Customizing Settings
2
Select the functions for which to designate output Trays A, B,
and C press [OK].
The optional Saddle Finisher-AE2 is attached.
[Printer] appears only if the optional UFR II/PCL Printer Kit or PS Printer Kit is
activated.
[Other] is used for designating a tray for printing reports.
[Receive/Fax] appears if the Universal Send Kit is activated, and the optional
Super G3 FAX Board or Super G3 Multi-Line FAX Board is installed. If only the
Universal Send Kit is activated, [Receive] appears. If only the optional Super G3
FAX Board or Super G3 Multi-Line FAX Board is installed, [Fax] appears.
If the optional Super G3 Multi-Line FAX Board is installed, you can set two
different trays for receiving faxes.
If you want to use an output tray for only one function, select only that function.
IMPORTANT
If a certain tray reaches its stacking limit, the machine automatically uses another
tray that is designated for the same function. However, it is recommended that you
only designate one tray for fax/I-fax documents to prevent them from getting lost.
If the optional Finisher-S1 and Copy Tray-J1 are attached and the Staple mode is
set, the sheets are output to Tray A, regardless of the Tray Designation settings.
If the optional Finisher-S1 and Copy Tray-J1 are attached and the following paper is
selected, the sheets are output to trays other than the Copy Tray-J1, regardless of
the Tray Designation settings: nonstandard, envelopes, heavy paper,
transparencies, labels, or tracing paper.
If the optional Inner 2 Way Tray-D1 and Copy Tray-J1 are attached and the
following paper is selected, the sheets are output to trays other than the Copy
Tray-J1, even if the Copy Tray-J1 is specified as the destination: nonstandard,
envelopes, heavy paper, transparencies, labels, or tracing paper.